Surface Mount VoIP Entry Phone (Model: E-20-IP)
- The E-20-IP VoIP Entry Phone is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-20-IP entry phone can be programmed from any touch tone phone, a PC on the same LAN, or remotely using a static IP address. The door entry phone can dial up to 5 programmable numbers.
- The E-20-IP entry phone will flash the “Call” LED during dialing and automatically light the LED when the call is answered. All programming parameters, including phone numbers, are stored in non-volatile memory, requiring no batteries. This unit is PoE powered.
Applications
- Gate Entrance
- Parking ramps / lots
- ATM machines
- Medical centers
- Lobbies
- Entryways
- Stadiums
- Convention centers
- Public access areas
Features
- 2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
- Blue “Call Connected” LED indicator
- SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
- PoE powered (class 1, <4 Watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- VoIP audio detection eliminates the need for “Push to Talk” mode
- Handsfree operation
- Chassis: Impact resistant, UV stable, light grey Geloy plastic with black UV stable pad printed graphics, surface mount only
- Programmable to dial up to 5 numbers
- Cycles through backup phone numbers on busy or ring-no-answer
- Hangs up on busy signal, time-out or touch tone command
- Programming software included
- Network downloadable firmware
- Remotely programmable
- Diagnostics for testing mic, speaker, and relay
- Extended temperature range: -40°F to 140°F (-40°C to 60°C)2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
- SIP Certified
Surface Mount Plastic VoIP Entry Phone with Enhanced Weather Protection (EWP) (Model: E-20-IP-EWP)
- The E-20-IP VoIP Entry Phone is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-20-IP entry phone can be programmed from any touch tone phone, a PC on the same LAN, or remotely using a static IP address. The door entry phone can dial up to 5 programmable numbers.
- The E-20-IP entry phone will flash the “Call” LED during dialing and automatically light the LED when the call is answered. All programming parameters, including phone numbers, are stored in non-volatile memory, requiring no batteries. This unit is PoE powered.
- Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
Applications
- Gate Entrance
- Parking ramps / lots
- ATM machines
- Medical centers
- Lobbies
- Entryways
- Stadiums
- Convention centers
- Public access areas
Features
- 2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
- Blue “Call Connected” LED indicator
- SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
- PoE powered (class 1, <4 Watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- VoIP audio detection eliminates the need for “Push to Talk” mode
- Handsfree operation
- Chassis: Impact resistant, UV stable, light grey Geloy plastic with black UV stable pad printed graphics, surface mount only
- Programmable to dial up to 5 numbers
- Cycles through backup phone numbers on busy or ring-no-answer
- Hangs up on busy signal, time-out or touch tone command
- Programming software included
- Network downloadable firmware
- Remotely programmable
- Diagnostics for testing mic, speaker, and relay
- Extended temperature range: -40°F to 140°F (-40°C to 60°C)2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
- SIP Certified
- EWP Certified
- IP66 Certified
